Versatile table clamp

Attach the barrel clamp to your table, and your embroidery frame in the jaws of the stem freeing both hands up to work!

A wonderful device for holding your embroidery steady and allowing to use both hands to work, this versatile table clamp is a must for any stitcher. You can clamp ring frames or stretcher bars in the clamp up to a maximum size of about 30cm (12inches) although you could use two for larger frames (see images above for how to clamp your frame). The jaws open to 3.5cm (an inch and a half) wide to fit all types of frames. The barrel clamps to a table so you will need a table of a maximum of 3.5cm thick (inch and a half) with a square section. The depth of the cutout in the barrel is 2.7cm (just over an inch); please check this will fit your table:

The verstaile table clamp is fully adjustable in height and angle; see my stitch videos to see one in use! This item comes in a calico draw string bag for convenient storage.

We sell the clamp only if you already have a barrel, seat frame or a floor frame and just need another clamp! And don't forget your wing nut tightener! See below.